Kādas ir galvenās Q235 tērauda caurules ražošanas metodes?
Q235 steel pipe is mainly produced by three processes: hot rolling, cold drawing and welding. Hot-rolled seamless pipe adopts perforation-rolling process, which is suitable for large-diameter thick-walled pipe production. Cold drawing process can produce small-diameter pipes with high precision (±0.1mm) and good surface Kvalitātes . metinātām tērauda caurulēm (piemēram, ERW) ir augsta ražošanas efektivitāte un zemas izmaksas, un tās ir piemērotas zema spiediena šķidruma pārvadājumiem . tērauda caurulēm, ko rada dažādi procesi, ir atšķirīga uzmanība uz veiktspēju un pielietojumu.
Kāds ir karsti velmēta Q235 tērauda caurules ražošanas process?
The production of hot-rolled Q235 steel pipe includes billet heating (1200-1250℃), perforation, pipe rolling, sizing and cooling. The rolling temperature is controlled above 950℃to ensure good plastic deformation ability. The final rolling temperature should be higher than the Ar3 phase transition point (about 850℃) to avoid abnormal tissue. Air cooling is usually used after rolling, and online heat treatment can be performed when special requirements are met. The dimensional tolerance of hot-rolled pipes is generally ±1%, and straightening and flaw detection are required.
Kādas ir auksti zīmētu Q235 tērauda cauruļu priekšrocības un trūkumi?
Auksti vilktas Q235 tērauda caurules priekšrocības ir augstas dimensijas precizitāte (tā {9- IT10 pakāpe), laba virsmas apdare (ra mazāka vai vienāda ar 1 . 6μm) un 10% -15% augstāka stiprība nekā karstā rullīša pipes .} Disadvantāti ir gari veidoti CLECE CLECES, .} Disadvantāti ir gari veidoti CLICE. 20% -30% augstākas izmaksas nekā karsti velti caurules, un pēc aukstās apstrādes ir nepieciešama sienas biezuma vienveidības kontroles grūtības ., lai pēc aukstas apstrādes novērstu darba sacietēšanu . Tas ir piemērots gadījumiem ar stingrām dimensijas prasībām, piemēram, hidrauliskiem cilindrniekiem un precizitātes mehāniskām daļām.
Kādi ir Q235 metinātu tērauda cauruļu ražošanas procesa galvenie punkti?
Q235 welded steel pipes use high-frequency resistance welding (ERW) or submerged arc welding (SAW) processes. The production line speed of ERW welded pipes can reach 20-60m/min, and the welding temperature is about 1350-1400℃. Key control parameters include extrusion pressure (200-400kN), opening angle and V-angle. After welding, online heat treatment (induction heating to 550-600℃) is required to improve the performance of the weld. Finally, it goes through processes such as sizing, straightening and water pressure testing.
Kā noteikt Q235 tērauda cauruļu kvalitāti?
The quality inspection of Q235 steel pipes includes chemical composition analysis (spectrometer), mechanical property testing (tensile testing machine), dimensional inspection (caliper, thickness gauge) and non-destructive testing (ultrasonic, eddy current). Welded steel pipes also need to undergo weld X-ray inspection and water pressure testing (test pressure is 1 . 5 reizes lielāks par darba spiedienu) . Virsmas kvalitāte jāpārbauda, vai nav defektu, piemēram, plaisas un krokas, un iekšējo virsmu var pārbaudīt pēc endoskopa.








